Descrizione
IMPORTANT INFORMATION
High/Low Temperature Alarm Setting
1.Stampa “C/F”, the high temperature is flashing;
2.Stampa “UP” e “DOWN” to set your target HIGH temperature;
3.Stampa “C/F” to finish the setting;
4.The same steps to set low temperature alarm.
Shut off the Temperature Alarm Function
1.Stampa “C/F”, the high temperature is flashing;
2.Stampa “UP” e “DOWN” simultaneously, the screen is flashing with OFF;
3.Stampa “C/F” to finish the setting;
4.The same steps to turn off low temperature alarm.
Finish Temperature Settings
Short press “C/F” to conform the settings, and the temperature will stop flashing (the settings will auto confirm after 15s without operations)
C/F Switch
Long press “C/F” to change the unit (short press to launch or confirm the setting).
Countdown Timer
1. Stampa “MIN” o “SEC” to set the the minutes or seconds.
2. Stampa “ST/SP” to start or stop the timer.
3. Stampa “MIN” e “SEC” simultaneously to clear the timer.
Countup Timer
1. Stampa “ST/SP” to start or stop the countup timer(the timer must be cleared first)
2. Stampa “MIN” e “SEC” simultaneously to clear the timer.
Turn Off the Alarm
Hit any button and the beeping stops(Il “HI” will keep flashing if the temperature is higher than setting, even though the alarm stops beeping, the same to “LO”)
SPECS:
Gamma: 32~572ºF(0~300ºC)
Accuracy: ±1.8°F (±1°C) from 32 to 392°F (0 to 199.9°C), ±3.6°F (±2°C) from 392 to 572°F (200 to 299.9°C)
Resolution: 0.1°F/°C full range
Probe Length: 6.3in(160mm)
Cord Length: 3.6ft(1.1m)
Batteria: 2 x AAA
Package Content:
1 x Thermometer
1 x Probe
1 x Probe Clip
1 x User Manual
Recensioni
Non ci sono ancora recensioni.