Description
IMPORTANT INFORMATION
High/Low Temperature Alarm Setting
1.appuyez sur “C/F”, the high temperature is flashing;
2.appuyez sur “UP” et “DOWN” to set your target HIGH temperature;
3.appuyez sur “C/F” to finish the setting;
4.The same steps to set low temperature alarm.
Shut off the Temperature Alarm Function
1.appuyez sur “C/F”, the high temperature is flashing;
2.appuyez sur “UP” et “DOWN” simultaneously, the screen is flashing with OFF;
3.appuyez sur “C/F” to finish the setting;
4.The same steps to turn off low temperature alarm.
Finish Temperature Settings
Short press “C/F” to conform the settings, and the temperature will stop flashing (the settings will auto confirm after 15s without operations)
C/F Switch
Long press “C/F” to change the unit (short press to launch or confirm the setting).
Countdown Timer
1. appuyez sur “MIN” ou “SEC” to set the the minutes or seconds.
2. appuyez sur “ST/SP” to start or stop the timer.
3. appuyez sur “MIN” et “SEC” simultaneously to clear the timer.
Countup Timer
1. appuyez sur “ST/SP” to start or stop the countup timer(the timer must be cleared first)
2. appuyez sur “MIN” et “SEC” simultaneously to clear the timer.
Turn Off the Alarm
Hit any button and the beeping stops(Le “HI” will keep flashing if the temperature is higher than setting, even though the alarm stops beeping, the same to “LO”)
SPÉCIFICATIONS:
Gamme: 32~572ºF(0~300ºC)
Précision: ± 1,8 ° F (± 1 ° C) from 32 to 392°F (0 to 199.9°C), ±3.6°F (±2°C) from 392 to 572°F (200 to 299.9°C)
Resolution: 0.1°F/°C full range
Longueur de sonde: 6.3in(160mm)
Cord Length: 3.6ft(1.1m)
La batterie: 2 x AAA
Package Content:
1 x Thermometer
1 x Probe
1 x Probe Clip
1 x User Manual
Commentaires
Il n'y a pas encore de critiques.