Description
DIRECT IGNITER PELLET HOPPER 12 INCH This is designed for people to make their own pellet stove at home or to replace a broken pellet stove. This kit comes with ALL the electrical components needed to make a great pellet smoker. Just attach the pellet hopper to your desired smoker pit and build appropriate Heat Deflector and Drip Tray. This is the EASIEST and CHEAPEST way to build a CUSTOM pellet smoker. These units also work with many of the common pellet stoves, such as Traeger, Pit Boss… an easy way to fix your broken pellet smoker. WHATS INCLUDED:1 Pellet Hopper Body 1 Digital Control Board with meat temp sensor 1 RTD Sensor Probe 1 Meat Sensor Probe 1 200W Igniter 1 Steel Burn Pot 1 2RPM Auger Motor 1 Auger Shaft Rod 1 Combustion/Induction Fan 1 Instruction Manual EVERYTHING IS FULLY ASSEMBLED… JUST NEEDS TO BE ATTACHED TO YOUR SMOKER PIT AND RTD PROPERLY PLACED AND INSTALLED. *** RTD PROBE PLACEMENT – RTD MUST be placed in close proximity to grill grate for accurate readings. RTD SHOULD NOT BE LOCATED NEAR OR TOUCHING ANY DIRECT FLAME OR HIGH HEAT*** YOU MUST HAVE A FLAME GUARD AND DRIP TRAY IN YOUR SMOKER FOR PROPER OPERATION. THESE ARE NOT INCLUDED AND MUST BE MADE CUSTOM FOR YOUR PROJECT. Please look at a commercial pellet stove brand internals before building your own pellet stove. This will help you with understanding how to design a proper flame guard and drip tray for best results. CONTROLLER DESCRIPTION: Has auto start/ auto light 200-550 in 5 degree increments. Includes SMOKE MODE with P Setting P Settings are 1-7 Digital Display Displays ACTUAL TEMP & MEAT PROBE TEMP Has Automatic Shut Down Feature “which runs the fan motor for 5 minutes after shut down to blow out fire and ashes” Has ANTI OVER COOK FEATURE – This feature lets you set a desired meat probe temperature and when the meat probe reaches this temperature, it will put the stove into smoke mode to keep your food warm but will help prevent over cooking meal.
Commentaires
Il n'y a pas encore de critiques.