Kamado factory Big Green Egg - Junta de rejilla de alto calor para parrilla de repuesto, apta para accesorios de ahumador de barbacoa preencogidos BGE grandes, autoadhesivo (Apto para LBGE)

Descripción

High Temp Performance Replacement Felt Gasket Fits for Large Big Green Egg，Self stick

Good Quality On Heat Sealing

High density material ensures high performance on heat sealing.

Safe To Use

Promised totally safe with high temp fireproof material.

Easy To Install

Self adhesive tape on the back allows you install easier.

Dimension

0.88″ width x 0.13″ thickness x 15 ” Length.;

Easy To Clean When Follow The Instructions

• Begin by slightly moistening the old gasket material with acetone or isopropy. Completely remove the old gasket with a flat-edged scraper, and then clean the rim of the base and lid with acetone or isopropy.
• Allow ceramic to dry for at least 30 acta; the surface must be clean and dry for the new gasket to adhere.
• Simply remove the backing from the gasket, taking care not to touch the adhesive side, and press firmly down onto the rim. Carefully curve or bend the gasket material around the rim, being careful not to let the gasket material hang over the inside edge. Do not pull to stretch the gasket; there is ample material for the top and bottom rim of your EGG. Trim any excess length as needed.
• Then allow gasket to cure for 24 hours in a dry location with the lid closed.

⚠Caution

Make sure the EGG is completely cool. Change gasket only in a dry, well-ventilated location.To improve longevity, keep gasket clean of grease and oils.

Información Adicional